Peerless HQS10/8 HQ-Air 10HP Rotary Screw Compressor Basemount – 8 Bar – 1200LPM are proud to produce its own brand in High Quality Rotary Screw Compressors (HQ-Air). We have always been involved with screw compressors but now have designed our own to suit the demands of the Australian market. Air-End RotoComp Compressor – recognised as the worlds best air-end for its superior performance under all conditions and used in other major brand names. High Quality Motor and power efficiency, IP level 55 rated, insulated rate F class, SFK bearing which provides the efficiency in the motor performance. Schneider Electric Components – world leading brand of electric parts mainly in managing electric energy to reduce electricity consumption which assures the stabilities of the electronic performance of the compressor.
Oil Filters – we have fitted a high end filter which provides a high filtration rate of up to 5 microns which will assist in the removal of dust and any impurities.
With the Peerless HQS10/8 HQ-Air 10HP Rotary Screw Compressor Basemount – 8 Bar – 1200LPM, we test each model prior to being sent out from our factory for a minimum of 4 hours. The quality assurance inspector then dates and signs the service label notifying of when the next service is required.
Services on Screw compressors are based on hourly usage. The first inspection is in 500 hours of use, this is like a new car inspection. This is to make sure that all seals, valves, filters and oil condition is all working correctly. From there the services are based on the following;
- 2000 Hours
- 4000 Hours
- 6000 Hours
- 8000 Hours and so on.
The services are also based on the environmental conditions – if it is in a fairly dirty environment, services maybe at sooner intervals.
Most sites where an air compressor is installed you may have your own maintenance team, if this is so, yes you can service your own air compressor. This does not void your warranty if serviced correctly under the manufacture guidelines.
||1200 (42.5 CFM) @ 8 BAR (116PSI)
||10HP / 7.5KW
||Rotorcomp – German made
||84A Start current
|Dimensions L x W x H
||800 x 600 x 1000
|Portable / Stationary