No products in the cart.
Facts About Coldsaw Blades
Cold saw blades are different from Bandsaw Blades, they are actually circular blades that happen to be used mostly in Cold Saw machines. These devices take their name from the way that they work – they take the heat that is generated through the cutting process and transfer it towards the chips which can be made by the blade. Because of this the blade itself stays cold.
Other saws are called abrasive saws and can generate a considerabe amount of heat through the friction produced by the cutting process. Cold Saws Blades are typically regarded as more reliable due to the method that they work and that means they can run for much longer. They utilize the tungsten carbide-tipped blades or blades make from solid, high-speed steel. The blades are powered by an electric powered motor which contains gears that allow an individual to adjust the speed from the blade while still making certain the torque is consistent. The saw has to be fed in a reliable, steady rate and it has a remarkably high chip requirement per tooth. As long as the saw is being fed on the right rate it creates virtually no dust, and because it remains cool there is absolutely no discoloration. Cold Saw blades also produce no sparts and incredibly little in the way of burr.
For safety as well as for a cleaner cut, the information must be securely clamped set up though it may be being cut. The operator must be sure that they chose the right cold saw blades for that material that may be being cut, like the right speed as well as the right feed rate. You can set these variables quite easily as well as a good saw can cut ferrous or non-ferrous metal alloys. Usually, they are utilized by using a special type of flood coolant that can help to lubricate the teeth in the blade whilst keeping them cool.
Originally, these saws were used by sheet metal roofers and they also were popular within the building industry because they can cut steel that is up to a quarter of the inch thick. They are used as an alternative to abrasive saws because they do not damage the protective coating on the metal. They produce a lot of swarf, which is often captured during the cutting process and employed in the production of other tools.
Cold Saw blades are capable of spinning at a rate as much as 5000 surface feet a minute, which sounds fast but is slow in comparison to other kinds of saw. The chip load is fairly high, however, along with the motors that operate the saws are really powerful. The blades are heat treated and hardened so that they will last for a long time, but the way they may be treated causes them to be brittle so they ought to be handled carefully. It is actually especially vital to ensure that the blade chosen is hardened on the right level for that material involved, and that it must be not run in an excessive speed. The blades has to be coated using the right protective coating (like Titanium aluminium nitride), and also the material has to be secured set up before cutting starts.