Sold Machines
-
Bramley Round Tube Bending Attach for PROBENDER (1/2″-1″)
Includes Ø12.7, Ø15.87, Ø19.05, Ø22.22, Ø25.4 Round Tube Cast Aluminium Formers Suits Bramley Pro Bender 35T
$1,971.00 Excl. GST $2,168.10 Incl. GST
Product ID: BRMLY-TBRD-ATTACH -
Hardcore Pressbrake Tooling Clamping Double Plate
Standard Euro Tooling Top Punch Holder Hardcore Pressbrake Tooling Clamping Double Plate
$230.00 Excl. GST $253.00 Incl. GST
Product ID: HT-CLAMP-DOUBLE-PLATE -
Hardcore Pressbrake Tooling Clamping Single Plate
Standard Euro Tooling Top Punch Holder Hardcore Pressbrake Tooling Clamping Single Plate
$325.00 Excl. GST $357.50 Incl. GST
Product ID: HT-CLAMP-SINGLE-PLATE -
Product ID: RBT-UPDB -
Antiscratch Film Urethane Bending Roll / Die Tape 10m x 0.6mm x 150mm Wide
This press brake urethane die film (Antiscratch Film Urethane Bending Roll / Die Tape 10m x 0.6mm x 150mm Wide) prevent die marking of your bent parts
$460.00 Excl. GST $506.00 Incl. GST
Product ID: CM-ASFUBRDT-10x06 -
Antiscratch Film Urethane Bending Roll / Die Tape 20m x 0.4mm x 100mm Wide
This press brake urethane die film prevent die marking of your bent parts
$560.00 Excl. GST $616.00 Incl. GST
Product ID: CM-ASFUBRDT-20x04 -
Antiscratch Film Urethane Bending Roll / Die Tape 10m x 0.4mm x 100mm Wide
This press brake urethane die film prevent die marking of your bent parts
$310.00 Excl. GST $341.00 Incl. GST
Product ID: CM-ASFUBRDT-10x04 -
Used Victor Lathe
Used Victor Lathe 400 x 1000, 400 mm swing (230 mm o/saddle) x 1000 mm centres, 51 mm spindle bore, 65-1800 rpm, mm and tpi threading, 7.5hp 415v motor. 3 and 4 jaw chucks, face plate. Machine weight 1420kg, ex govt, tidy condition. Machine manual.
$6,500.00 Excl. GST $7,150.00 Incl. GST
Product ID: USED-VICTOR-LATHE -
Used Sullivan Paletek D375PDJD Compressor
The Sullivan Paletek D375PDJD Compressor High Pressure compressor is built for the job site with a dual pressure switch for 100 of 150 psi operation. This unit can run tools or back up plant air at 100 psi or sandblast at 150 psi with a single flip of a switch. It also has two stage air filters, tool boxes, galvanized inner fenders and Galvanneal coating on sheet metal for rust and scratch protection, plus a cooler cleaning access panel. The containment base provides full liquid containment, which is essential in some industrial, wet land and critical job sites.
$18,750.00 Excl. GST $20,625.00 Incl. GST
Product ID: SP-D375PDJD -
Atlas Copco XAS186 Compressor – Skid Mounted
The Atlas Copco XAS186 Compressor – Skid Mounted delivers 392CFM free air delivery and 102psi (g) normal effective working pressure. The XAS range has been specially designed for heavy duty working environments such as the renovation industry (sandblasting) and quarries. They can assist in installing fibre optic cables, or be combined with combinations of pneumatic tools such as rock drills, hammers, to name a few. High altitudes and extremely high and low ambient temperatures are not a problem. Four pressure variants make these units fit for almost any applicatio
Was $ 19,300.00 Excl. GST $ 21,230.00 Incl. GST Now Only$17,850.00 Excl. GST $19,635.00 Incl. GST
Product ID: ATLAS-XAS186-SM -
Used Atlas Copco Compressor XAS 375 DD6 Portable Air Compressor – 392CFM, 102psi With Air Dryer
The Atlas Copco Compressor XAS 375 DD6 Portable Air Compressor delivers 392CFM free air delivery and 102psi (g) normal effective working pressure. The XAS range has been specially designed for heavy duty working environments such as the renovation industry (sandblasting) and quarries. They can assist in installing fibre optic cables, or be combined with combinations of pneumatic tools such as rock drills, hammers, to name a few. High altitudes and extremely high and low ambient temperatures are not a problem. Four pressure variants make these units fit for almost any applicatio
$23,500.00 Excl. GST $25,850.00 Incl. GST
Product ID: ATLAS-XAS175-AD-SM -
Product ID: USED-SF3 -
Product ID: USED-SF2 -
Product ID: USED-SF1 -
Rolleri ROLC4000/S Adaptor Plate 4100mm
C45 matrix channel. Maximum load = 1000kN / m. Ideal for using 60mm base dies on a 97mm board.
$3,750.00 Excl. GST $4,125.00 Incl. GST
Product ID: ROL-C4000-S -
Rolleri ROLC3000/S Adaptor Plate 3100mm
C45 matrix channel. Maximum load = 1000kN / m. Ideal for using 60mm base dies on a 97mm board.
$2,950.00 Excl. GST $3,245.00 Incl. GST
Product ID: ROL-C3000-S -
Used DoAll 500-SNC – NC Automatic Mitre Cutting Bandsaw
The DoAll NC Automatic Bandsaw horizontal metal cutting band saw is an affordable Numeric Controlled (NC) angle cutting saw that will increase flexibility and provide greater efficiency for general purpose sawing. The DoAll NC Automatic Bandsaw features a saw head that swings 60 degrees, conveniently located NC touch controls, single stroke indexing to 40″ and 8x multiple indexing. The 500-SNC high production horizontal metal cutting band saw is also known as a cutoff or scissor saw. Made in the USA.
$14,600.00 Excl. GST $16,060.00 Incl. GST
Product ID: USED-DOALL-NC -
USED Parkanson PK700DMS & Conveyor System
Used Parkanson PK700DMS Semi Automatic Bandsaw and 4 X Heavy Duty Conveyor 5000mm x 850mm
$24,000.00 Excl. GST $26,400.00 Incl. GST
Product ID: USED-PK700DMS-HDCONVERYOR -
Rolleri Gasparini Style Tooling – Style Hydraulic Clamping
Quality Rolleri Gasparini Style Tooling – Style Hydraulic Clamping
Product ID: ROLLERI-SHC -
Unitech HP 100 Hydraulic Horizontal Press
The HP100 Horizontal Hydraulic Press Machine with standard controls is extremely versatile and is ideal for precision bending, straightening, punching, and shearing making it possible to produce a vast assortment of different parts such as braces, hooks, rings, brackets, clips from heavy-duty metal.
Product ID: UNITECH-HP100 -
Unitech HP 80 Hydraulic Horizontal Press
The HP80 Horizontal Hydraulic Press Machine with standard controls is extremely versatile and is ideal for precision bending, straightening, punching, and shearing making it possible to produce a vast assortment of different parts such as braces, hooks, rings, brackets, clips from heavy-duty metal.
Product ID: UNITECH-HP80 -
Unitech HP 50 Hydraulic Horizontal Press
The HP50 Horizontal Hydraulic Press Machine with standard controls is extremely versatile and is ideal for precision bending, straightening, punching, and shearing making it possible to produce a vast assortment of different parts such as braces, hooks, rings, brackets, clips from heavy-duty metal.
Product ID: UNITECH-HP50 -
Unitech HP 40 Hydraulic Horizontal Press
The HP40 Horizontal Hydraulic Press Machine with standard controls is extremely versatile and is ideal for precision bending, straightening, punching, and shearing making it possible to produce a vast assortment of different parts such as braces, hooks, rings, brackets, clips from heavy-duty metal.
Product ID: UNITECH-HP40 -
Unitech HP 30 Hydraulic Horizontal Press
The HP30 Horizontal Hydraulic Press Machine with standard controls is extremely versatile and is ideal for precision bending, straightening, punching, and shearing making it possible to produce a vast assortment of different parts such as braces, hooks, rings, brackets, clips from heavy-duty metal.
Product ID: UNITECH-HP30 -
Unitech HP 20 Hydraulic Horizontal Press
The HP20 Horizontal Hydraulic Press Machine with standard controls is extremely versatile and is ideal for precision bending, straightening, punching, and shearing making it possible to produce a vast assortment of different parts such as braces, hooks, rings, brackets, clips from heavy-duty metal.
Product ID: UNITECH-HP20 -
Unitech HP 10 Hydraulic Horizontal Press
The HP10 Horizontal Hydraulic Press Machine with standard controls is extremely versatile and is ideal for precision bending, straightening, punching, and shearing making it possible to produce a vast assortment of different parts such as braces, hooks, rings, brackets, clips from heavy-duty metal.
Product ID: UNITECH-HP10 -
Used Parkanson PK460SAM Semi Automatic Mitre Cutting Bandsaw
The Used Parkanson PK460SAM metal cutting bandsaw is a mitre cutting bandsaw which is ideal for medium to large steel fabricators. With a capacity of 450 x 320mm. All Parkanson Bandsaws cut to their full capacity.
$9,850.00 Excl. GST $10,835.00 Incl. GST
Product ID: USED-PK460SAM -
Bramley Pipe Bending Optional Attachment
The Bramley Pipe Bending Optional Attachment is designed to fit onto the Bramley Pro Bender 35T horizontal bender to bend 1/2′′ to 2′′ pipe.
Please note:This is an optional attachment; only the machine is sold separately. Includes Ø1/2″, Ø3/4″, Ø1″, Ø1-1/4″, Ø1-1/2″, Ø2″ Cast Aluminium Formers to suit Pro Bender 35T
$1,590.00 Excl. GST $1,749.00 Incl. GST
Product ID: BRMLY-PB-A -
Bramley Large V bending Attachment
Large V bending Attachment
• Enables bending of larger sections of the flat bar such as 75 x 16mm or 50 x 20mm
$700.00 Excl. GST $770.00 Incl. GST
Product ID: BRMLY-LVB-A -
Bramley Rebar Bender/Straightening Attachment
Bramley Rebar Bender/Straightening Attachment Bending round and reinforcing bar with a diameter of up to 32 mm. It can also be used to straighten up to 40mm dia. round bar or 50 x 25mm flat bar, among other things.
Note:
Attachment only not a complete machine
$1,304.00 Excl. GST $1,434.40 Incl. GST
Product ID: BRMLY-RBS-A -
Bramley PROBENDER 35T Hydraulic Bending Machine
No Longer AvailableThe Bramley PROBENDER 35T Hydraulic Bending Machine is a standard machine. It is a robust, powered hydraulic bender of 35-ton rated capacity, supplied with an attachment for bending flat bar up to 100 x 12 mm or round and square bar up to 5mm.
Product ID: BRMLY-PR35-T -
Used TRENNJAEGER High Speed Circular Metal Saw (TS01)
Used TRENNJAEGER High Speed Circular Metal Saw (TS01) has a blade diameter of 430mm. This machine comes complete with 415v, 3 Phase electrics.
$2,900.00 Excl. GST $3,190.00 Incl. GST
Product ID: TRENNJAEGER-TS01 -
Product ID: USED-SRE -
Used IMet BS350/60 AFI-NC Bandsaw
CNC automatic bandsaw, hydraulically driven; mitre cutting from 0° to 60° left. Hydraulic fixed vice with pressure reducer, anti- burr hydraulic vertical vice on the unloading side.
$12,850.00 Excl. GST $14,135.00 Incl. GST
Product ID: USED-IMET-BS350-60 -
Used Sunrise IW100S Punch And Shear
The Used Sunrise IW100S Punch And Shear have two control foot pedals, & separate operations can be safely performed simultaneously without interference. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke & deep throat enable mounting a wide range of special equipment.
$14,900.00 Excl. GST $16,390.00 Incl. GST
Product ID: USED-SUNRISE-IW100S -
Used ASADA Bar and Bolt Threading Machine
This Asada No.1 bolt threader comes with 650w single phase motor, equipped with removable legs for easy transporting and storage, ideal machine on construction sites for anchor bolts turnbucles stud bolts and suspension bolts and also for general engineering shops and approx threading times: 3/8 44.5sec 1 37.0sec
$1,900.00 Excl. GST $2,090.00 Incl. GST
Product ID: USED-ASADA-BBTM -
Used Swadesir Pipe 16B Bender
16B ELECTRIC/HYDRAULIC PIPE BENDER – 240V: Model 16B Power Hydraulic Pipe Bending Machine is designed to bend both hot & cold rolled nominal bore pipe, heavy gauge steel tube & flat bar section.
$1,900.00 Excl. GST $2,090.00 Incl. GST
Product ID: USED-SWADESIR-16B-BENDER -
Wila Style HWP 157.60.R1 Top Tool 157 High 60 Deg 500mm Long
700 kN/m max.
Length:500mm
Radius: 1
Angle: 60 DegreesCapital Machinery carries a wide array of high-quality precision press brake tooling for Wila Trumpf. All our Wila Trumpf press brake tooling are manufactured from premium alloy tool steel. All the wear surfaces of the punches and dies are induction hardened for maximum durability.
Product ID: HWP157.60-R1 -
Wila Style HWP 157.60.R4 Top Tool 157 High 60 Deg 500mm Long
1300 kN/m max.
Length:500mm
Radius: 4
Angle: 60 DegreesCapital Machinery carries a wide array of high-quality precision press brake tooling for Wila Trumpf. All our Wila Trumpf press brake tooling are manufactured from premium alloy tool steel. All the wear surfaces of the punches and dies are induction hardened for maximum durability.
Product ID: HWP157.60.R4 -
$19,550.00 Excl. GST $21,505.00 Incl. GST
Product ID: USED-ATLS-XAS136 -
$15,525.00 Excl. GST $17,077.50 Incl. GST
Product ID: USED-KSR-M38 -
Used COSEN SH-700DM Semi Automatic Double Mitre Bandsaw
Best Used COSEN SH-700DM Semi Automatic Double Mitre Bandsaw For more Info please contact us.
$12,950.00 Excl. GST $14,245.00 Incl. GST
Product ID: USED-COSEN-SH700DM -
Was $ 8,900.00 Excl. GST $ 9,790.00 Incl. GST Now Only$7,420.00 Excl. GST $8,162.00 Incl. GST
Product ID: USED-MARKSMAN-PS -
$9,500.00 Excl. GST $10,450.00 Incl. GST
Product ID: USED-ICARO-CMBNED-RB-RC -
Rolleri ROL200 Vertical Clamp Manual With INT150
The new clamping ROL200 for Punches! Compatible with Amada, Boschert, Bystronic-Beyeler Euro-B, Durmazlar, Ermaksan, Gasparini, Haco, Promecam, etc. The new patented system enables manual, pneumatic or hydraulic vertical clamping of your top tools. The special features are the enormously simple handling and the surprisingly low price, which guarantees huge efficiency. It is available as retrofitting as well as original equipment.
$995.00 Excl. GST $1,094.50 Incl. GST
Product ID: ROL-200-M -
M60-85-50 Rolleri Single Vee Die 50mm Vee 85 Degree 60mm H – 415mm
M60-85-50 Rolleri Single Vee Die 50mm Vee 85 Degree 60mm H is a product from years of experience in sheet metal fabrication. It is designed to perform with outmost precision and produce quality results. Capital Machinery is supplying a wide variety of pressbrake tooling that comes in different types and dimensions. For custom-made tooling, contact us for more information.
$495.00 Excl. GST $544.50 Incl. GST
Product ID: PBT-M60-85-50-2 -
SA101.35.10 Hemming Tool
Hemming punch and die sets are designed to flatten or hem a part after a 30-degree bend has Sales offer. All our hemming tooling here at Capital Machinery Sales offer a solution to make the 30-degree bend and hem all in one handling. For custom pressbrake tooling requirements, our team can work with you to engineer a solution to meet your specific needs.
$1,898.00 Excl. GST $2,087.80 Incl. GST
Product ID: HT-SA101-35-10 -
SA135.26.12 Hemming Tool
Hemming punch and die sets are designed to flatten or hem a part after a 30-degree bend has been made. All our hemming tooling here at Capital Machinery Sales offer a solution to make the 30-degree bend and hem all in one handling. For custom pressbrake tooling requirements, our team can work with you to engineer a solution to meet your specific needs.
$2,525.00 Excl. GST $2,777.50 Incl. GST
Product ID: HT-SA135-126-12 -
Used Kingsland Multi 95 Iron Worker
The Kingsland MULTI series Ironworkers are built to perform steel and metalworking applications at an optimal level. These robust steelworkers have 5 working stations, equipped with safety control systems for operators. The Kingsland Multi 95 Iron Worker is able to perform 2 stations simultaneously. The updated system gives accurate power inching at all five workstations and allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning.
$12,750.00 Excl. GST $14,025.00 Incl. GST
Product ID: USED-KIN95-IW -
Hardcore Multi V Block Pressbrake Length 3700 x 100 x 100mm, V sizes 40, 10, 24, 70mm
This Hardcore Multi V Block Pressbrake Length 3700 x 100 x 100mm, V sizes 40, 10, 24, 70mm specifications are material: 42CrMo4, Hardness: 45-48 HRC and Surface Treatment: Standard. Package via Wooden Box
$5,594.00 Excl. GST $6,153.40 Incl. GST
Product ID: HPT-MV
