Roll over image to zoom in
Excision Cold saw Blades for Excision 350 – VMD – 350mm Diameter
- Excision Coldsaw Blades for Excision 350 – VMD
- Suitable for general purpose steel cutting.
- Saw Blade Helpful Tip Blade Break In – The extremely sharp tooth points and edges of new blades must be broken in before applying full feed pressure to the blade. A good analogy is that of writing with a freshly sharpened wooden pencil.
Excision Cold saw Blades for Excision 350 - VMD - 350mm Diameter
Excision Cold saw Blades for Excision 350 - VMD - 350mm Diameter
You may also like
-
$220.00 Excl. GST $242.00 Incl. GST Product ID: EC-350-VMDExcision Cold Saw Blades for Excision 350 – SMD – 350mm Diameter
$220.00 Excl. GST $242.00 Incl. GST -
$171.00 Excl. GST $188.10 Incl. GST Product ID: EC-315-SMDExcision Cold saw Blades for Excision 315 – SMD – 315 mm Diameter
$171.00 Excl. GST $188.10 Incl. GST -
$220.00 Excl. GST $242.00 Incl. GST Product ID: EC-350-VMD-
Excision Cold saw Blades for Excision 350 – VMD – 350mm Diameter
$220.00 Excl. GST $242.00 Incl. GST
Description
Recommended Procedure For Cold Saw Blades
- Maintain regular cold saw blade speed to suit the material to be cut
- Reduce blade feed pressure or feed rate by 50% for the first 300 to 600 square centimetres of material cut
- Gradually increase feed pressure or feed rate after break in to full pressure rate
Additional information
Additional information
| Weight | 0.2 kg |
|---|---|
| Saw Type | |
| Blade Diameter |
