Peerless PB2500 Peerless Black Single Phase Air Compressor – Direct Drive Portable – 1.5kW / 2.5HP 8 bar – 5CFM/154LPM – Tank Mount

$500.00 Excl. GST $550.00 Incl. GST

In stock

The Peerless Black PB2500 Direct Drive Air Compressor – 154LPM 10AMP is designed for the building industry and home handyman, being one of the largest direct drives on the market producing 154 litres of free air delivery per minute, the PB2500 also ensures a more compact lightweight compressor that is portable and fits easily in the back of a utility. Suitable for framing gun and finishing gun but not suitable for a coil gun, for a coil gun we recommend using the Peerless Black 14000 belt drive air compressor. For a light industrial air compressor it packs a lot of punch but it also has its limitations, keep in mind for high air demands you will have to step it up to a bigger air compressor like a belt drive, be sure to check your air tools for the air flow requirements but most importantly use our “Find the right air compressor” tool located on our home page to assist in making the right decision for your air needs.

Request Quotation / Check Stock / Questions Please note: This is the fastest way to receive an answer.
Stock levels cannot be checked over the phone.
$500.00 Excl. GST $550.00 Incl. GST
Fast Finance
From $2.28 Per Week

Description

The Peerless Black 2500 is designed for the building industry and home handyman, being one of the largest direct drives on the market producing 154 litres of free air delivery per minute, the PB2500 also ensures a more compact lightweight compressor that is portable and fits easily in the back of a utility.

Suitable for framing gun and finishing gun but not suitable for a coil gun, for a coil gun we recommend using the Peerless Black 14000 belt drive air compressor.

For a light industrial air compressor it packs a lot of punch but it also has its limitations, keep in mind for high air demands you will have to step it up to a bigger air compressor like a belt drive, be sure to check your air tools for the air flow requirements but most importantly use our “Find the right air compressor” tool located on our home page to assist in making the right decision for your air needs.

Important

Please note: air compressors i.e piston type, are not designed to run continuously they must cut in and out. Direct drive models should only have up to a 40-50% duty cycle. Belt Drive hobby models are up to 60-70% and full industrial belt drive models are up to 75-85%. If the compressor runs over these duty cycles it could cause failure. Important – first check voltage on each building site as low voltage will cause the motor to fail on all compressors. It must have be better than 230 volt at peak times. Extension leads will cause voltage drop, it’s better to use extra air hose.

Performance of all our belt driven air compressors are to AS4637.

For over 60 years Peerless Products has been delivering and exceeding the needs of industry. Ask us about your requirements.

Specification
Code PB2500
Free Air Delivery (LPM) 154 LPM
Max PSI 145
Motor HP 2.5
Warranty Pump 1 Year
Warranty Motor 1 Year
Tank Capacity (L) 30L
Pump up time to 100PSI 1.35 – 1.40 Min
Cooling method Air cooled
Pump type Alloy Direct Drive
Cylinders 1
Pump head tension 7.8 FT LB 11NM
Oil capacity 550mL
Pump RPM 2850
Outlet thread 1/4″ BSP
Electricity 240V / 10A
Amps draw 8
Dimensions (mm) 780 x 350 x 650 mm
Weight (kg) 25kg

Frequently Asked Questions

Should I purchase industrial machinery from a tool shop or reseller, or from an industrial machinery specialist?

Tool shops and general resellers may offer a wide product range, but often lack the specialised knowledge to properly assess applications or provide ongoing technical support. An industrial machinery specialist ensures the right machine is selected and fully supported long after purchase. In most cases, buying directly from the importer or specialist also results in a lower purchase cost, as additional reseller margins are not added.

What after-sales support and warranty do you provide?

Industry leading after-sales support, Australia-wide. Backed by over 30 years of industry experience, more than two decades in business, and a long history of satisfied customers Australia-wide, Capital Machinery Sales provides after-sales support you can count on, long after your machine is delivered, backed by our dedicated support team.
  • Application support: Whether your requirements are straightforward or highly specific, we work with you to ensure your machine is set up and performing for your exact application, and we are here to help as your needs evolve.
  • Pre-dispatch testing: Every machine is fully checked and commissioned before it leaves us. It's a step that saves our customers countless issues down the track and sets your machine up for maximum uptime.
  • Warranty: We don't just pass on the manufacturer's warranty. We offer our own comprehensive warranty that goes further, giving you greater coverage and peace of mind, with extended warranty options also available.
  • Spare parts: Downtime costs you money, so minimising it is our priority. We keep a wide range of parts and consumables in stock, and if we don't have it on the shelf, we will track it down and get it to you as fast as possible.
  • Remote support: Fast help via phone, email, or live video, with no site visit needed in most cases. We pride ourselves on some of the fastest response times in the industry, because we know that when you need help, you need it now.
  • On-site service: Our engineers travel Australia-wide, with trusted contractors covering remote areas.
  • In-house repairs: Send your machine back to us for expert servicing and overhaul.
We’re in this together. Our shared goal is to keep your business running, and we are committed to delivering the best after‑sales service in the industry to make that happen. That’s why so many of our customers have been with us for years, and why they continue to return. Need service, application advice, or want to discuss a support plan? Contact our team and we will take care of it.

How quickly will I receive my machine?

Often, we can ship the same day if required, depending on stock availability, the time your order is placed and the available shipping options.

Specification

Additional information

Weight 35 kg
Dimensions 88 × 45 × 75 cm
Compressor Type

, ,

Dryer Configuration

Pump Motor

Motor size

Compressor Type (Air End)

Air Quality / Lubrication

Mount Type

CFM

LPM

Kilowatt (kW)

, , ,

Horse Power (HP)

Voltage Supply Type

Power Source

Our Clients

Lantrak
Crane Aid
Denkat Truck Bodies
Tait Motors
South Burnett Engineering
Case VIC
1800 706 620