Blitzer NKO B15 INOX Stainless Steel Handheld Beveler – 2850W, 230V – Edge Beveling & Rounding

The Blitzer B15 INOX is a handheld beveling machine for stainless steel, developed specifically for machining stainless materials rather than adapted from a general-purpose mild steel tool. The operator guides the machine along the workpiece edge by hand, and a replaceable milling head fitted with cutting inserts removes material to form a V-bevel, a facing cut, or a rounded edge. Bevel angle and profile are changed by swapping the milling head, with heads available for 0°, 30°, 37.5°, 45°, 50°, and 60° bevels, other angles on request, and R 2.5 mm, R 3.5 mm, and R 4 mm edge radii.

Its 2850 W motor runs through a mechanical speed reduction to 1950 rpm. This low-speed beveling machine design is intended to suit stainless steel cutting and contributes to longer cutting insert life. Maximum bevel width is 15 mm, rated on material with a strength of up to 400 MPa. Two LED indicators support day-to-day operation: one displays machine load so the operator can manage feed pressure, and the other signals when the carbon brushes need replacing.

The B15 INOX works in two modes. Used on its own, it follows curves and contours, making it a practical handheld edge chamfering tool for shaped workpieces and cut-outs. Paired with the optional inoXpipe guide, it rides comfortably along long, straight edges on sheet and profile, and the same guide supports its use as a stainless steel pipe beveling tool. An optional clamp provides a controlled entry and exit point for the machine on the workpiece. This machine-only configuration suits operators who already own compatible accessories or who need the machine for freehand contour work.

As a portable stainless steel beveler with manual feed, the B15 INOX brings weld preparation to the job rather than the job to a fixed machine. It suits Australian fabrication shops, pressure piping and process installation work, structural steel, and on-site maintenance where stainless steel weld preparation must be clean and consistent. The B15 INOX is supplied as the machine only, without milling head or accessories; milling heads are selected separately to match the required bevel angle or radius.

Key features

• Built for stainless steel – A dedicated stainless steel beveling machine for V-bevel, facing, and radius profiles on stainless plate, profiles, pipe, and shaped parts.
• 2850 W motor at reduced speed – Mechanically reduced to 1950 rpm, supporting stainless steel cutting and extending the service life of the cutting inserts.
• Up to 15 mm bevel width – Delivers bevels from 0 to 15 mm wide on material rated up to 400 MPa, using interchangeable 0° to 60° milling heads.
• Edge rounding capability – Works as a stainless steel edge rounding machine with R 2.5 mm, R 3.5 mm, and R 4 mm radius heads for coating preparation and safe edges.
• inoXpipe guide compatible – Accepts the optional inoXpipe guide for comfortable, stable travel along long, straight edges and for pipe beveling.
• Freehand contour work – Used without the guide, the handheld weld prep machine follows curves, contours, and shaped workpieces.
• Load and brush LED indicators – A machine load LED helps the operator manage feed, while a second LED signals when the carbon brushes require replacement.
• Machine-only supply – Supplied without milling head or accessories, so heads, guide, and clamp can be chosen to suit the bevel profiles and workpieces on each job.

Specifications

Shipping & installation

• Shipping weight: 13 kg
• Shipping dimensions (L x W x H): 72 x 22 x 21 cm
• Freight options available on request

Warranty & support

• Warranty Period: 12 months from the date of delivery.
• Warranty Coverage: Covers material and manufacturing defects and the proper functioning of the machine.
• Warranty Service: Covered defects will be rectified free of charge and without undue delay.