Roll over image to zoom in
Rapidcut-8L Pneumatic Cutter
Rapidcut pneumatic cutters are lightweight and easy to handle. Rapidcut 8 Series Cutters are fitted with M60L cutter heads, which suits rebar and mesh to 686 Mpa (70kg/mm2) yield strength.
Rapidcut-8L Pneumatic Cutter
Rapidcut-8L Pneumatic Cutter
You may also like
-
-
$4,890.00 Excl. GST $5,379.00 Incl. GST Product ID: RAP-04 -
$3,635.00 Excl. GST $3,998.50 Incl. GST Product ID: Rapidcut-12LPC -
-
-
$3,090.00 Excl. GST $3,399.00 Incl. GST Product ID: RAP-03 -
$3,385.00 Excl. GST $3,723.50 Incl. GST Product ID: Rapidcut-12PC
Description
Rapidcut pneumatic cutters are lightweight and easy to handle.
- They require minimal maintenance, reducing down time and making them a very cost-effective tool in demanding applications.
Rapidcut 8 Series Cutters are fitted with M60L cutter heads, which suits rebar and mesh to 686 Mpa (70kg/mm2) yield strength.
- Typical rebar and mesh sold in Australia is rated at 500Mpa.
- M80L cutter heads are available from stock to fit existing cutters.
Specifications
| Total Weight | 7.2 Kg. |
| Dimensions | 805 mm long x 250mm high |
| Cutting Range | Maximum 8mm Ø in steel up to 70 Kg./mm2 Maximum 5mm Ø in steel up to 180 Kg./mm2 |
| Cutting Velocity | 60 cuts per minute |
| Air Pressure Required | 90 – 120 PSI (6—8.5 Bar) |
| Air Consumption | Approx: 7 litres/cut at 7 Bar |
Additional information
Additional information
| Weight | 7.2 kg |
|---|---|
| Supply Voltage | |
| Capacity |
