SMG F610 Pneumatic Flange Facing Machine (Facing Range: 2 – 24” (50 – 610mm)
The SMG F610 Pneumatic Flange Facing Machine (Facing Range: 2 – 24” (50 – 610mm) is an overall cost effective technique which allows you to face, bevel, and turn pipe, value and pump flange with ease . Which in turn helps to keep your plant running efficiently, safely and more environmentally friendly. It gives machine shop accuracy , combined with ease of handing and portability in the flange range .Spur gears engage directly on the drive ring, keep power requirements and losses to a minimum and allowing maximum torque at the cutting tool . When the machine is used in the vertical plane , balancing is greatly reduced. F610 can be used in horizontally, vertically or overhead planes.
SMG F610 Pneumatic Flange Facing Machine (Facing Range: 2 – 24” (50 – 610mm)
SMG F610 Pneumatic Flange Facing Machine (Facing Range: 2 – 24” (50 – 610mm)
Description
SMG F610 Pneumatic Flange Facing Machine – Operations Manual
The SMG F610 Pneumatic Flange Facing Machine (Facing Range: 2 – 24” (50 – 610mm) is an overall cost effective technique which allows you to face, bevel, and turn pipe, value and pump flange with ease . Which in turn helps to keep your plant running efficiently, safely and more environmentally friendly. It gives machine shop accuracy , combined with ease of handing and portability in the flange range .Spur gears engage directly on the drive ring, keep power requirements and losses to a minimum and allowing maximum torque at the cutting tool . When the machine is used in the vertical plane , balancing is greatly reduced. F610 can be used in horizontally, vertically or overhead planes.
Specification
| Technical Details | ||
| Facing Diameter: | ||
| Min Facing Diameter | 2.0 inches | 50 mm |
| Max Facing Diameter | 24.0 inches | 609.6 mm |
| ID Mounting Diameter | ||
| Min I.D. Mount | 2.0 inches | 50 mm |
| Max I.D. Mount | 22 inches | 558 mm |
| Stroke: | ||
| Tool Feed Stroke | 2.0 inches | 50 mm |
| Tool Post Swivel Angle | + / – 30⁰ | |
| R.P.M | Min:0 | Max:42 |
| Drive-Pneumatic @ 90 P.S.I (6 bar) Servo motor system Electric motor | 0.89 KW 0.75 KW 1.3 KW | 1.2 HP 1.0 HP 1.75 HP |
| Air Consumption / Supply Required | 42 S.C.F.M | 1.2 m³/min |
| Approximately Operational Weight | 99 lbs | 45 kg |
| Approximately Shipping Weight | 136 lbs | 72 kg |
| Approximately Shipping Dimensions Length x Width x Height | 26 x 18 x 16 inches | 670 x 450 x 400 mm |
| Facing Feed Rates | ||||
| inches/rev | mm/rev | Grooves per inches | Grooves per mm | |
| 1.00mm Pitch Lead Screw (optional) | ||||
| Fine | 0.004 | 0.114 | 224 | 880 |
| Coarse | 0.018 | 0.455 | 56 | 220 |
| 1.25mm Pitch Lead Screw (standard) | ||||
| Fine | 0.006 | 0.142 | 179 | 700 |
| Coarse | 0.022 | 0.568 | 45 | 180 |
| 1.75mm Pitch Lead Screw (standard) | ||||
| Fine | 0.008 | 0.199 | 128 | 500 |
| Coarse | 0.031 | 0.795 | 32 | 130 |
Operational Dimensions
Quick and Easy Setup & Removal
- Separate mounting chuck.
- All centering and leveling is done on the chuck.
Lightweight
- Body of machine weighs only 99 lbs (45 kg).
- Smallest mounting chuck weighs about 5 lbs (2.2 kg).
Safe and Quiet Operation
- Stationary feed rate selector.
- Machine is controlled without touching any moving parts.
- Exhaust air is routed through body of machine for increased muffling.
Simplified Operation
- Single selector switch for bidirectional radial feed or vertical downfeed.
- One wrench size for clamping jaws and body draw bolt.
Cuts Chamfers and Grooves
- Compound tool head and downfeed for cutting angles and grooves.
The SMG F610 Pneumatic Flange Facing Machine (Facing Range: 2 – 24” (50 – 610mm) machine is supplied complete with toolkit including tools and inserts, air filter lubricator and hose connection, all required mounting base and extensions, storage / shipping box, CE certificate, packing list and manual.
F610 Packing picture
SMG F610 Flange Facing Machine Packing List
| Item | Product Name | Quantity | Unit |
| 1 | Primary machine | 1 | SET |
| 2 | Base support | 3 | SET |
| 3 | Pneumatic motor | 1 | SET |
| 4 | Mounting block | 4 | PCS |
| 5 | Lead screw | 3 | Unit |
| 6 | Mounting leg | 12 | PCS |
| 7 | Counterweight block | 1 | PC |
| 8 | Counterweight plate | 1 | PC |
| 9 | Balance bar | 4 | PCS |
| 10 | Gasket | 1 | PC |
| 11 | Arm bolt | 4 | PCS |
| 12 | Air filter | 1 | SET |
| 13 | Air Hose | 1 | PC |
| 14 | Cutter head | 6 | PCS |
| 15 | Cutters | 3 | PCS |
| 16 | Allen wrench tools | 3 | SET |
| 17 | Hex socket | 2 | PCS |
| 18 | RTJ grooving tools | 1 | SET |
| 19 | HSS Tool | 1 | PC |
| 20 | Operation Manual | 1 | UNIT |
| 21 | Wooden package/Optional Steel package | 1 | UNIT |
APPLICATIONS
SMG F610 ON SITE MACHINE TOOLS
Flange facing machine application for Oil, Gas and Chemical ,Power Generation ,Heavy Equipment ,Ship building & repair Typical applications:
- Piping system flanges
- Valve flanges and bonnet flanges
- Heat exchanger flanges
- Vessel flanges
- Flange faces on piping systems
- Pump housing flanges
- Weld preps
- Tube sheet bundles.
- Bearing mounting bases
- Final drive hubs
- Bull gear faces
- Manufacturing of mining equipment
- Slew rings
- Bearing mounting bases
- Crane pedestal flange.
SMG F610 Pneumatic Flange Facing Machine – Full Installation & Setup Guide
- flange facer
- flange facing head
- flange facing tool
- flange facing lathe
- flange facing system
- flange facing machine
- flange facing service
- flange facing standard
- flange facing equipment
- flange facing operation
- flange refacing machine
- cnc flange facing machine
- pipe flange facing machine
- flange facing machine parts
- flange facing machine price
- flange facing machine types
- flange facing machine video
- flange facing machine market
- flange facing machine rental
- flange facing machine repair
- mirage flange facing machine
- flange facing machine for sale
- flange facing machine industry
- flange facing machine training
- portable flange facing machine
- flange facing machine suppliers
- hydraulic flange facing machine
- flange facing machine application
- flange facing machine maintenance
- flange facing operation procedure
- flange facing machine manufacturer
- flange facing machine specification
- portable flange facing machine supplier
Frequently Asked Questions
Should I purchase industrial machinery from a tool shop or reseller, or from an industrial machinery specialist?
What after-sales support and warranty do you provide?
- Application support: Whether your requirements are straightforward or highly specific, we work with you to ensure your machine is set up and performing for your exact application, and we are here to help as your needs evolve.
- Pre-dispatch testing: Every machine is fully checked and commissioned before it leaves us. It's a step that saves our customers countless issues down the track and sets your machine up for maximum uptime.
- Warranty: We don't just pass on the manufacturer's warranty. We offer our own comprehensive warranty that goes further, giving you greater coverage and peace of mind, with extended warranty options also available.
- Spare parts: Downtime costs you money, so minimising it is our priority. We keep a wide range of parts and consumables in stock, and if we don't have it on the shelf, we will track it down and get it to you as fast as possible.
- Remote support: Fast help via phone, email, or live video, with no site visit needed in most cases. We pride ourselves on some of the fastest response times in the industry, because we know that when you need help, you need it now.
- On-site service: Our engineers travel Australia-wide, with trusted contractors covering remote areas.
- In-house repairs: Send your machine back to us for expert servicing and overhaul.
