22mm
-
PortaForce PF22B Portable Rebar Bender/Bending Machine
The versatile PF22B Portable Rebar Bender Machine is an invaluable addition to any construction site. This machine has been engineered with aeronautical-grade alloy chassis with a high-pressure hydraulic system, making it both lightweight, robust and extremely powerful.
Capable of bending round steel, threaded rods, and reinforcement bars up to 90 degrees with minimum noise output. The intuitive design ensures economic and effortless operation.$2,391.00 Excl. GST $2,630.10 Incl. GST
Product ID: PORTAFORCE-PF22B -
PortaForce PF32SB Portable Rebar Bender/Straightener Machine
The versatile PortaForce PF32SB Portable Rebar Bender/Straightener Machine is an invaluable addition to any construction site. This machine has been engineered with aeronautical-grade alloy chassis with a high-pressure hydraulic system, making it both lightweight, robust and extremely powerful.
Capable of bending round steel, threaded rods, and reinforcement bars up to 90 degrees. The intuitive design ensures economic and effortless operation.$3,745.00 Excl. GST $4,119.50 Incl. GST
Product ID: PORTAFORCE-PF32SB -
Reflex CBX-22 Premium Rebar Bender 6–22mm 2 Year Warranty
The Reflex CBX-22 is a compact, table-style rebar bender engineered for professional concreting and construction applications. Designed to meet the daily demands of job sites and prefab yards, it delivers consistent, high-speed bends for steel reinforcement from 6 mm to 22 mm.
$6,197.00 Excl. GST $6,816.70 Incl. GST
Product ID: REFLEX-CBX-22 -
Reflex CBX-32 Premium Rebar Bender 6–32mm 2 Year Warranty
The Reflex CBX-32 is a compact, table-style rebar bender engineered for professional concreting and construction applications, providing the strength needed for demanding tasks with its innovative electric rebar bend technology. Designed to meet the daily demands of job sites and prefab yards, it delivers consistent, high-speed bends for steel reinforcement fabrication from 6 mm to 32 mm.
$7,560.00 Excl. GST $8,316.00 Incl. GST
Product ID: REFLEX-CBX-32 -
Pronto BC42 Rebar Cutter – Heavy-Duty Steel Cutting Machine
The Pronto BC42 Rebar Cutter – Heavy-Duty Steel Cutting Machine is a high-performance electric rebar cutter built for demanding construction environments. Engineered for efficiency, reliability, and long service life, it delivers clean, consistent cuts through steel reinforcement bars and hard materials.
$8,744.00 Excl. GST $9,618.40 Incl. GST
Product ID: PRONTO-BC42 -
ICARO C32 Rebar Cutter
The ICARO C32 Rebar Cutter is designed to perform efficient cutting for steel rod and rebar. ICARO Rebar Cutting machinery is proudly manufactured in Italy using local European electronics and hardware, combined with superior but straightforward designs offering the highest quality results and reliability.
$10,248.00 Excl. GST $11,272.80 Incl. GST
Product ID: ICARO-RC-C32HP3 -
ICARO CP26/32 Combined Production Rebar Cutter And Bender – 240vac Single Phase
For unmatched bending and cutting applications, the ICARO CP26/32 Combined Rebar Cutter And Bender Machine presents a great addition to your workshop. Allowing the operator cut and bend rebar on the same machine in one location.
Our Combined Rebar Cutter and Bending machines are guaranteed to produce efficient quality results.
$14,127.00 Excl. GST $15,539.70 Incl. GST
Product ID: ICARO-CP-26-32-HP3-1 -
ICARO C52 Rebar Cutter
The ICARO C52 Rebar Cutter is designed to perform efficient cutting for steel rod and rebar.
ICARO Rebar Cutting machinery is proudly manufactured in Italy using local European electronics and hardware, combined with superior but straightforward designs offering the highest quality results and reliability.
$14,320.00 Excl. GST $15,752.00 Incl. GST
Product ID: ICARO-RC-C52HP55 -
ICARO CP26/32 Combined Production Rebar Cutter And Bender
For unmatched bending and cutting applications, the ICARO CP26/32 Combined Rebar Cutter And Bender Machine presents a great addition to your workshop. Allowing the operator cut and bend rebar on the same machine in one location.
Our Combined Rebar Cutter and Bending machines are guaranteed to produce efficient quality results.
$14,540.00 Excl. GST $15,994.00 Incl. GST
Product ID: ICARO-CP-26-32-HP3 -
ICARO CP30/35 Combined Rebar Cutter And Bender
For unmatched bending and cutting applications, the ICARO CP30/35 Combined Rebar Cutter And Bender Machine presents a great addition to your workshop. Allowing the operator cut and bend rebar on the same machine in one location.
Our Combined Rebar Cutter and Bending machines are guaranteed to produce efficient quality results.
$14,725.00 Excl. GST $16,197.50 Incl. GST
Product ID: ICARO-CP-30-35-HP4 -
ICARO P42 Rebar Bender
The ICARO P42 Rebar Bender presents is a practical investment for your workshop. Our selection of Rebar Benders are all manufactured with the premium European electronics and hardware that ensuring exceptional longevity and performance results even on the most demanding projects.
$15,221.00 Excl. GST $16,743.10 Incl. GST
Product ID: ICARO-RB-P42-HP4 -
Reflex RHD42A Reinforcing Steel Bar Cutter
Reflex RHD42A Reinforcing Steel Bar Cutter simple and easy to use, Heavy duty cutting performace and Internal electric motor protected from weather
Was $ 19,310.00 Excl. GST $ 21,241.00 Incl. GST Now Only$18,146.00 Excl. GST $19,960.60 Incl. GST
Product ID: REFLEX-RHD42A -
ICARO C55 Rebar Cutter
The ICARO C55 Rebar Cutter is designed to perform efficient cutting of both rebar and steel rods.
With a superior yet straightforward design offering efficient cutting of single or multiple bars greatly improving production.
Proudly manufactured in Italy using local European electronics and hardware for performance and reliability.
These machines are operator-friendly, low-maintenance, and the top choice for precast panel manufacturers, steel merchants, and civil construction companies.$16,744.00 Excl. GST $18,418.40 Incl. GST
Product ID: ICARO-RC-C55HP75 -
ICARO CP38/45 Combined Rebar Cutter And Bender
ICARO CP38/45 – Combined Rebar Cutter and Bender Machine present a great addition to your workshop. Allowing the operator to cut and bend rebar on the same machine in one location. Our Combined Rebar Cutter and Bending machines are guaranteed to produce quality results.
$16,827.30 Excl. GST $18,510.03 Incl. GST
Product ID: ICARO-RB-CP3845 -
ICARO P42 Rebar Bender With Digital Angle Controller
The ICARO P42 Rebar Bender presents is a practical investment for your workshop. Our selection of Rebar Benders are all manufactured with the premium European electronics and hardware that ensuring exceptional longevity and performance results even on the most demanding projects.
$18,094.00 Excl. GST $19,903.40 Incl. GST
Product ID: ICARO-RB-P42-HP4-DAC -
Reflex RHD42A Reinforcing Steel Bar Cutter with Foot Pedal
Reflex RHD42A Reinforcing Steel Bar Cutter: Setting the Industry Standard
Introducing the Reflex RHD42A Reinforcing Steel Bar Cutter – The industry standard for commercial rebar processing. Preferred by large reinforcement bar processing plants across Australia, these machines are chosen for their rapid processing speeds and capacity to process multiple bars, utilizing an ergonomic design, and unmatched reliability. The ideal machine to reduce labour and increase processing capacity. All consumables, blades and spare parts are stocked and shipped the same day.
Buy with confidence – Proudly supplied with a 2-year warranty.
Reflex RHD42A Rebar cutting machine is a durable compact bar processing machine suitable for the production cutting of multiple bars.(Remote foot Pedal included)
Was $ 19,914.00 Excl. GST $ 21,905.40 Incl. GST Now Only$18,750.00 Excl. GST $20,625.00 Incl. GST
Product ID: REFLEX-RHD42A-FP -
ICARO CP38/45 Combined Rebar Cutter And Bender With Digital Angle Controller
For unmatched bending and cutting applications, the ICARO CP38/45 Combined Rebar Cutter And Bender Machine present a great addition to your workshop. Allowing the operator cut and bend rebar on the same machine in one location.
Our Combined Rebar Cutter and Bending machines are guaranteed to produce efficient quality results.
$21,211.00 Excl. GST $23,332.10 Incl. GST
Product ID: ICARO-CP-38-45-HP55-DAC -
Reflex 45 VCH Reinforcing Steel Bar Cutter
Reflex 45 VCH Reinforcing Steel Bar Cutter Simple and easy to use, Heavy duty cutting performance and Internal electric motor protected from weather
Product ID: RELFEX-45VCH -
Used ICARO CP26/32 Combined Production Rebar Cutter And Bender Machine
Used ICARO CP26/32 Combined Rebar Cutter And Bender – Less than 12 months old with Warranty.
This machine presents a great addition to your workshop. Allowing the operator cut and bend rebar on the same machine in one location.
Our Combined Rebar Cutter and Bending machines are guaranteed to produce efficient quality results.
$8,600.00 Excl. GST $9,460.00 Incl. GST
Product ID: USED-ICARO26-32
