WiseLaser EVO W Series Wire Feeder Setting Configuration

We walk through the key adjustments you need to optimize your welding performance:

• Primary Power Setting: Understand how to set your primary power range (typically 40-80) and why going too fast or having the temperature too high/low affects melt depth and welding efficiency.
• Operating Status & Standby Mode: Learn about the system’s operational status and how it transitions to standby when not actively welding.
• Manual Control Buttons: See the functions for manual wire feeding and plate return.
• Settings Interface: A deep dive into the main configuration screen:
• Wire Feeding Speed: How to precisely set and save your current wire feeding speed (e.g., setting it to 70) and why saving is critical to prevent parameter reset.
• Original Start: Configuring whether the wire feeder starts immediately or waits (usually set to zero).
• Manual Retractor Length: Adjusting the length the welding wire retracts after releasing the button (e.g., 10mm or 12mm) to ensure proper weld ending without a gap.
• Delay: Setting the delay after button release.
• Pulse Function (Yin-Yang Festival): Explore the advanced pulse feature settings:
• Pulse Parameters: The typical settings (e.g., 25/250).
• Pulse Cycle & Speed: Configuring the pulse cycle (e.g., 2) and pulse speed (e.g., 250).
• Smoothness: Understanding the smoothness setting (e.g., 250) for instant wire feeding transition and how to adjust the minimum for optimal function.
• Coordinated Parameters: The explanation of how the wire feeding, pause time (e.g., 250 milliseconds), and other pulse parameters work together.

Perfect for new operators or anyone looking to fine-tune their WiseLaser EVO W Series for maximum welding quality and efficiency!

#fiberlaserwelding #laserweldingmachine #HowTo #Tutorial #WiseLaserMachines